Moen YB2824BN Eva Brushed Nickel 24-Inch Towel Bar

From reading the other reviews, it seems that many of the problems are due to the included anchor (standard expanding metal molly bolt type). I'm not a fan of these, because once expanded you basically have to drive them through the wall to remove them. Instead of using these anchors, I did myself a favor: I removed the included anchors from the plastic mount and instead used threaded drywall anchors (EZ Ancor 75lb rating, look like big plastic screws, the top flange is exactly the same size as the recess in the mount, and the screws that come with them fit the hole in the mount perfectly). With these installed in the wall, the mounts screw down nice and tight solid, absolutely no wiggle or play, no worrying about how many turns you need, and I can unscrew these if I ever want to remove them from the wall in the future. (Even though you technically don't have to, I predrilled holes for the anchors to keep them neat.)

Note: the 75lb rating plastic anchor splits when the mounting screw is driven in completely. The EZ Ancor line also includes a metal anchor that, like the older plastic model, doesn't split, and is rated at only 45 lbs. Although better than the molly bolts, the non-splitting threaded anchors don't hold nearly as solidly as the splitting ones.)

I had mixed results with the "clicking" of the ends to the mounts: with the 24-inch models, all audibly (but quietly) "clicked". The 18-inch models did not (or didn't click loudly enough for me to hear them the tabs aren't all that big). However, all are very snug fitting, and I'm pretty confident that they'll hold up. Make sure that you triple-check your measurements between centers (18" rack has 18" centers, 24" rack has 24" centers) and that you have the tabs on the mounts on the correct side to match the holes in the end pieces.

Overall, a pretty solid design (much better than those cheap setscrew, sheetmetal mount racks that they replaced), and they match the Eva faucets as well.

This has to be the most poorly designed mounting system I've seen. There is a single screw in the middle so any pressure (like a hung towel) pulls the mount away at the top. Like another review posted, I could not get it to "click into place" so the sides holding the rod have a lot of play and the bar comes free from the ends. Be aware that the illustration doesn't show or mention it, but the rod is not round. It has an edge on the top and bottom. I should have paid more attention to the other posted reviews.

Buy Moen YB2824BN Eva Brushed Nickel 24-Inch Towel Bar Now

This will be my last Moen product. This design is the worst I have ever seen. After not being able to even hang the bar, I called Moen and was told I needed another part (at $17.00 plus shipping and handling). When the part arrived it did not look like it would solve the problem so I called Moen's help desk. They disagreed with my opinion and said the part would work....it did not. So now I've spent $50.00 and have nothing to show for it. What a lesson learned about Moen's products.

Moen YB2818BN Eva 18-Inch Towel Bar, Brushed Nickel

Read Best Reviews of Moen YB2824BN Eva Brushed Nickel 24-Inch Towel Bar Here

We bought this towel bar more than 2 years ago. It looks great and works great. I can't speak to the installation because we had our contractor do it as part of our bathroom remodel. He never complained about it, though. I've had other towel rods get loose but this one is holding strong, even with my young sons constantly pulling at the towels. I would highly recommend this towel bar!

Want Moen YB2824BN Eva Brushed Nickel 24-Inch Towel Bar Discount?

Seems to be a good quality item. I like their lifetime warranty. The only reason not 5 stars is the instructions are pretty bad; if I didn't have years of handyman experience, I would have a lot of trouble following modern day Moen instructions; nothing written; just pictures.

Save 36% Off